100RV / SPR Slurry Sump Pump With Selfagitating , Non Clog
Impellers
Introduction:
Fratures of Vertical Rubber Sump Pump SVR-100R:
The ‘SPR’ range is vertical cantilevered shaft design similar to
the ‘GPS’, but features full elastomer protection on all submerged
components. This allows this pump to be used in highly corrosive
applications. Available in sizes ranging from 40mm through to 150mm
Fully Cantilevered – Eliminates submerged bearings, packing, lip
seals, and mechanical seals that other vertical slurry pumps
typically require.
Impellers – Unique double suction impellers; fluid flow enters the
top as well as the bottom. This design eliminates shaft seals and
reduces thrust load on the bearings.
Large Particle – Large particle impellers are also available and
enable passing unusually large solids.
Bearing Assembly – The maintenance friendly bearing assembly has
heavy duty roller bearings, robust housings, and a massive shaft.
Manufacturer and exporter of rubber lined slurry pumps, our product
range also comprises of abrasive slurry pumps, chemical process
slurry pumps and vertical extended shaft slurry pumps.
Specifications:
| Model | SVR-100R |
| Capacity | 54-289m3/h |
| TDH | 5-35m |
| Rated Motor Power | 75Kw |
| Speed | 500-1200r/min |
| Max. Efficiency | 56% |
| Standard Shaft Length | 1500mm |
Materials of Construction:
| Part Description | Material |
| Casing | - Black Natural Rubber |
| Impeller | - Black Natural Rubber |
| Back Liner | - Black Natural Rubber |
| Shaft | Carbon Steel |
| Mounting Plate | Mild Steel |
| Strainers | Synthetic Rubber |
Specifications:
| Natural Rubber | Standard |
| Hardness(Shore A) | 52±3 |
| 300% Stretching Strength(MPa) | ≥4 |
| Tensile Strength(MPa) | ≥21 |
| Elongation at Break(%) | ≥500 |
| Tensile Set at Break(%) | ≤25 |
| Rubber to Metal Bonding Pull Strength(MPa) | ≥5 |
| Akron Abrasion cm3/1.61km | ≤0.08 |
| Acid & Alkali Resistant PH Value(Liquid) | 3-12≤65℃
|
Performance Curve:
| Type | Size | Frame | Impeller:SVR10206 | Shaft Seal | Frame Rating(kw) | Normal Max Speed(r/min) | Max Passage Size(mm) |
| SPR | 100 | R | 5 Open Type Rubber Vans, Diameter:390mm | Gland Packing, Expeller, Mechanical Seal | 75 | 1200 | 40 |
| SVR Series Vertical Rubber Sump Pump Specifations & Prices |
| | | |
Pump
Model | S×D
(mm) | Allowable
Max. Power
(kw) | Material | Clear Water Performance | Impeller | Pricing |
| Capacity Q | Head
H(m) | Speed
n(r/min) | Max.Eff.
η% | Length
Shaft (mm) | No. of
Vanes | Vane Dia.
(mm) | Weight
(kg) |
| Impeller | m3/h | l/s |
| SVR/40P | 80×40 | 15 | Rubber
() | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 900 | 5 | 195 | 275 |
| SVR/65Q | 120×65 | 30 | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 1200 | 290 | 420 |
| SVR/100R | 175×100 | 75 | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 1500 | 390 | 850 |
| SVR/150S | 240×150 | 110 | 72-504 | 20-140 | 10-35 | 500-1000 | 56 | 1800 | 480 | 1720
|
Construction of Vertical Slurry Pump:
Serial Number Parts Name Serial Number Parts Name
1 SHAFT 9 BACK LINER
2 BEARING 10 IMPELLER
3 BEARING HOUSING 11 PUMP CASING
4 BEARING SPACER 12 LOWER STRAINER
5 BEAIRING 13 DISCHARGE PIPE
6 SHIM 14 FLUSHING PIPE
7 COLUMN 15 COUPLING PART
8 STRAINER 16 MIDDLE SUPPORT PART
Projects with Vertical Slurry Pumps:
SME SPR Sump Pump Orders:
