1. Introduction:
Interchangeable rubber slurry pump parts can be used on the World
renowned brand Warman.
We supply interchangeable slurry pump parts, both metal and rubber
lined. The rubber material we used has superior resistance to all
other materials in fine particle slurry applications. The
antioxidants and anti degradents used in our material have been
optimized to improve storage life and reduce degradation during
use. The high erosion resistance is provided by the combination of
its high resilience, high tensile strength and low shore hardness.
Slurry pumps are made for high wearing and heavy duty and high
corrosion slurry applications. Our pumps and replacement parts are
used worldwide industries like mining, mineral processing, power
generation, aggregate processing, or any type of slurry pumping
application. We specialise in handling the toughest and most
abrasive applications and have taken this to a new level with the
SH (interchangeable with Warman ) series.
| Formula | Rubber Type | Shore Hardness | Tensile Strength | Elongation | Impact Elasticity | Proportion | Characteristics |
| Natural Rubber | 50±3 | 24 | 500 | 70 | 1.07 | Tear Resistance |
| S42 | Neoprene | 50±3 | 11 | 450 | | 1.3 | High Temp. Proof |
| U01 | Polyurethane | 80±3 | 30 | 500 | | 1.2 | High Wear Resistant |
2.Construction of Rubber Lined Slurry Pumps:
Components:
Impeller
The impeller, either elastomer, stainless steel or high-chrome
material, is the main rotating component which normally has vanes
to impart the centrifugal force to the liquid.
Casing
Split outer casing halves of cast contain the wear liners and
provide high operation pressure capabilities. The casing shape is
generally of semi-volute or concentric, efficiencies of which are
less than that of the volute type.
Shaft and Bearing Assembly
A large diameter shaft with a short overhang minimizes deflection
and vibration. Heavy-duty roller bearing are housed in a removable
bearing cartridge.
Shaft sleeve
A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals
at both ends protects the shaft. A split fit allows the sleeve
removed or installed quickly.
Shaft Seal
Expeller drive seal, Packing seal, Mechanical seal.
Drive Type
V-belt drive, gear reducer drive, fluid coupling drive, and
frequency conversion drive devices.
3. Specifications:
| SH ( ) Series Slurry Pump Metal Slurry Pump Specifications |
|
Pump
Model | S×D
(inch) | Allowable
Max. Power (kw) | Material | Clear Water Performance | Impeller | Pricing |
| Capacity Q | Head
H(m) | Speed
n(r/min) | Max.Eff.
η% | NPSH
(m) | No. of
Vanes | Vane Dia.
(mm) | Weight
(kg) |
| Impeller | m3/h | l/s |
| SH/25B | 1.5×1 | 15 | Metal
(A05) | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2-4 | 5 | 152 | 91 |
| SH/40B | 2×1.5 | 15 | 32.4-72 | 9-20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 184 | 118 |
| SH/50C | 3×2 | 30 | 39.6-86.4 | 11-24 | 12-64 | 1300-2700 | 55 | 4-6 | 214 | 191 |
| SH/75C | 4×3 | 30 | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4-6 | 245 | 263 |
| SH/75D | 4×3 | 60 | 245 | 363 |
| SH/100D | 6×4 | 60 | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5-8 | 365 | 626 |
| SH/100E | 6×4 | 120 | 365 | 728 |
| SH/150E | 8×6 | 120 | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 510 | 1473 |
| SH/150F | 8×6 | 260 | 510 | 1496 |
| SH/150R | 8×6 | 300 | 510 | 1655 |
| SH/200F | 10×8 | 260 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | 3193 |
| SH/200ST | 10×8 | 560 | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 686 | 3750 |
| SH/250F | 12×10 | 260 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | 3760 |
| SH/250ST | 12×10 | 560 | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 762 | 4318 |
| SH/300ST | 14×12 | 560 | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-10 | 965 | 6409 |
| SH/350TU | 16×14 | 1200 | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 |
1067 |
10000 |
4.Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
